Digitale stroomtang | AC - DC | 40A - 400A

  • Beschrijving
  • Specificaties
AC - DC stroombereik: 40A, 400A
AC - DC Voltage: 600V
Weerstand: 40 Mohm
Capaciteit: 40nF - 40 mF
Frequentie: 10Hz - 10 Mhz
Bekopening: 28mm
Diodetest, Doorbeltest, datahold, LCD backlight.
LCD afmeting: 18 x 35.6 mm
Afmeting: 215 x 76 x 36 mm

Product parameters:

- measurement of voltage, current and frequency of high voltage up to 600 V
- measurement of frequencies 10Hz to 10MHz
- measuring capacitances 40nF to 40mF
- ratio (relative) measurement of voltages and capacitances
- multi-segment display and audible / visual alarm
- protection against voltages greater than 600V across ranges
- contactless detection of live conductors
- automatic range switching
- accuracy of current and voltage measurements is guaranteed in the range of 1% to 100% of ranges


Technical parameters:

1. AC current measurement (ranges / resolution / accuracy):

40.00A / 0.010A / 50Hz ~ 100Hz ± (2.0% +5)
400.0A / 0.100A / 50Hz ~ 100Hz ± (2.0% +5)
- frequency monitoring accuracy when measuring AC current in the range of 50 to 100Hz is ± (1.0% + 5) at 0.1Hz resolution
- overload protection at 620A


2. DC current measurement (ranges / resolution / accuracy):

40.00A / 0.010A / ± (2.0% +5)
400.0A / 0.100A / ± (2.0% +5)
- overload protection at 620A


3. AC voltage measurement (range / resolution / accuracy):

4.000V / 0.001V / 10Hz ~ 10kHz ± (1.0% +5)
40.00V / 0.010V / 10Hz ~ 10kHz ± (0.8% +5)
400.0V / 0.100V / 10Hz ~ 10kHz ± (0.8% +5)
600.0V / 1V / 10Hz ~ 10kHz ± (0.8% +5)
- frequency monitoring accuracy when measuring AC voltage in the range of 10Hz to 60kHz ± (0.5% + 2) at a resolution of 0.01Hz to 0.01kHz
- overload protection at 600Vrms
- input impedance approx. 10MGΩ


4. DC voltage measurement (range / resolution / accuracy ):

400.0mV / 0.100mV / ± (0.7% +3)
4.000V / 0.001V / ± (0.5% +2)
40.00V / 0.010V / ± (0.5% +2)
400.0V / 0.100V / ± (0.5% +2)
600.0V / 1V / ± (0.5% +2)
- input impedance approx. 10MΩ
- overload protection at 600Vrms


5. Resistance measurement (ranges / resolution / accuracy):

400.0Ω / 0.1Ω / ± (1.0% +2)
4.000kΩ / 0.001kΩ / ± (0.8% +2)
40.00kΩ / 0.01kΩ / ± (0.8% +2)
400.0kΩ / 0.1kΩ / ± (0.8% +2)
4,000MΩ / 0.001MΩ / ± (2.5% +5)
40.00MΩ / 0.01MΩ / ± (2.5% +5)
- overload protection at 600 Vrms
- open circuit voltage approx. 1V


6. Capacity measurement (ranges / resolution / accuracy):

40.00nF / 0.01nF / ± (4.0% +5)
400.0nF / 0.1nF / ± (4.0% +5)
4.000μF / 0.001μF / ± (4.0% +5)
40.00μF / 0.01μF / ± (4.0% +5)
400.0μF / 0.1μF / ± (4.0% +5)
4,000mF / 0.001mF / ± 10.0%
40.00mF / 0.01mF / ± 10.0%
- overload protection at 600 Vrms


7. Frequency and charge measurement (ranges / resolution / accuracy):

frequency: 10Hz to 10MHz / 0.01Hz to 0.01MHz / ± (0.1% +4)
filling: 0.1 to 99.9% / 0.1% / ± (3.0% +5)

- Note 1) Measurement sensitivity:
≤100kHz: 200mVrms ≤ input amplitude ≤ 30V RMS
> 100kHz ~ 1MHz: 600mV RMS ≤ input amplitude ≤ 30V RMS
> 1MHz ~ 10MHz: 1V RMS ≤ input amplitude ≤ 30V RMS

- Note 2) Measurement of filling (working ratio) is applicable only for square wave ≤10kHz, amplitude: 1V p-p
Frequency ≤ 1kHz Working ratio (Filling): 10.0% ~ 95.0%
Frequency> 1kHz Working ratio (Filling): 30.0% ~ 70.0%
- overload protection at 600 Vrms


8. Circuit continuity check:

- if the measured resistance is less than 10Ω, the signal of the continuous circuit sounds a buzzer
- if the measured resistance is greater than 31alizace, the open circuit signal does not sound a buzzer
- uncertainty in the range of 10Ω to 31Ω
- open circuit voltage about 2.0V
- measurement in the range of 600Ω
- overload protection at 600 Vrms


9. Diode measurement:

- in the forward direction, the voltage drop of the semiconductor junction is less than or equal to 2V
- for a silicon junction, a typical voltage drop is 0.5 to 0.8V
- open circuit voltage about 4.0V
- measurement in the range of 6,000V


10. Non-contact electric field sensing (NCV):

- allows to detect live wires in two sensitivities -EFLo and - EFHi for low voltage distribution 110V/50/60Hz and 230V/50/60Hz


Other parameters :

- measurement of maximum and minimum values: yes
- measurement in relative (ratio) mode for voltage and capacitance measurement: yes
- HOLD: yes
- low battery indication: yes
- automatic power off: yes
- battery supply 1.5 V (R03): 2pcs
- backlit display size: 37 mm x 25 mm
- product dimensions: 215 mm x 63 mm x 36 mm
- net weight of the product: 235 g
- product color: red and gray


Package contents:

- clamp multimeter UT204R: 1pc
- test leads: 1 pair
- battery 1.5 V (R03): 2pcs
- instructions for use: 1pc

UNI-T
UT-203R
6935750520307
kg
    Levertijd:1 - 2 werkdagen
Bestel